This model example is an earth embankment consisting of a reservoir on the left and a river at elevation 4m to the right. The seepage solution was prepared in SVFLUX.
Model filename: Ponds > 2DBank.svm
This particular model is designed to form a steady-state example of this type of heat flow analysis. Also, it is designed to illustrate the use of SVHEAT to calculate thermal gradients, which radiate out from a pond. An axis-symmetric condition is set-up in this numerical model.
Model filename: Ponds > CircularPondTherm.svm
The following example demonstrates how to setup a three dimensional seepage example that models the steady-state water flow from a pond to a body of water at the bottom of a slope.
Model filename: Ponds > Pstr01.svm
This example examines the flow from a reservoir to a nearby river channel. Instructions for setting up this model can be found in the SVFlux Tutorial Manual.
Model filename: Ponds > Reservoir3D.svm
The following example will introduce you to the three-dimensional model in CHEMFLUX. The model will be used to investigate if contaminant from a reservoir will travel to a river channel due to advection and dispersion processes within a 400 day time period. The 400 day time period was chosen as the time necessary to install a pumping well between the river channel and the reservoir. The well will be used to pump contaminant from the ground to ensure the plume will not reach the river channel. The example model begins with a brief description of the steady-state seepage analysis completed to provide CHEMFLUX with computed seepage gradients. Next a detailed set of instructions guides the user through the creation of the 3D contaminant transport model.
Model filename: Ponds > ReservoirChemFlux.svm
The model is an earth embankment consisting of a reservoir on the left and a river at elevation 4m to the right. The seepage solution was prepared in SVFLUX.
Model filename: Ponds > T2DBank.svm
This particular pond example shows the example of a heating pond, which in a transient way radiates heat out from the pond.The purpose of this model is to illustrate the transient use of SVHEAT to calculate thermo gradients in these types of situations.
Model filename: Ponds > TCircularPond.svm
Back to Gallery